Attenuation
SCPI Commands
INPut<InputIx>:ATTenuation
- class AttenuationCls[source]
Attenuation commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get(inputIx=InputIx.Default) float [source]
# SCPI: INPut<ip>:ATTenuation value: float = driver.applications.k30NoiseFigure.inputPy.attenuation.get(inputIx = repcap.InputIx.Default)
This command defines the total attenuation for RF input. If you set the attenuation manually, it is no longer coupled to the reference level, but the reference level is coupled to the attenuation. Thus, if the current reference level is not compatible with an attenuation that has been set manually, the command also adjusts the reference level.
- param inputIx
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘InputPy’)
- return
attenuation: Range: see data sheet , Unit: DB
- set(attenuation: float, inputIx=InputIx.Default) None [source]
# SCPI: INPut<ip>:ATTenuation driver.applications.k30NoiseFigure.inputPy.attenuation.set(attenuation = 1.0, inputIx = repcap.InputIx.Default)
This command defines the total attenuation for RF input. If you set the attenuation manually, it is no longer coupled to the reference level, but the reference level is coupled to the attenuation. Thus, if the current reference level is not compatible with an attenuation that has been set manually, the command also adjusts the reference level.
- param attenuation
Range: see data sheet , Unit: DB
- param inputIx
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘InputPy’)