Cold

SCPI Commands

SENSe:CORRection:ENR:MEASurement:SPOT:COLD

class ColdCls[source]

Cold commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → float[source]

# SCPI: [SENSe]:CORRection:ENR[:MEASurement]:SPOT:COLD
value: float = driver.applications.k30NoiseFigure.sense.correction.enr.measurement.spot.cold.get()

This command defines a constant temperature of a resistor not supplied with power (Tcold) used during measurements. The command is available when you have selected a noise source with resistor characteristics with [SENSe:]CORRection:ENR[:MEASurement]:TYPE.

return

temperature: Temperature in degrees Kelvin. Unit: K

set(temperature: float) → None[source]

# SCPI: [SENSe]:CORRection:ENR[:MEASurement]:SPOT:COLD
driver.applications.k30NoiseFigure.sense.correction.enr.measurement.spot.cold.set(temperature = 1.0)

This command defines a constant temperature of a resistor not supplied with power (Tcold) used during measurements. The command is available when you have selected a noise source with resistor characteristics with [SENSe:]CORRection:ENR[:MEASurement]:TYPE.

param temperature

Temperature in degrees Kelvin. Unit: K