Dline<DisplayLine>

RepCap Settings

# Range: Nr1 .. Nr2
rc = driver.applications.k50Spurious.calculate.dline.repcap_displayLine_get()
driver.applications.k50Spurious.calculate.dline.repcap_displayLine_set(repcap.DisplayLine.Nr1)

SCPI Commands

CALCulate<Window>:DLINe<DisplayLine>

class DlineCls[source]

Dline commands group definition. 2 total commands, 1 Subgroups, 1 group commands Repeated Capability: DisplayLine, default value after init: DisplayLine.Nr1

get(window=Window.Default, displayLine=DisplayLine.Default) → float[source]

# SCPI: CALCulate<n>:DLINe<dl>
value: float = driver.applications.k50Spurious.calculate.dline.get(window = repcap.Window.Default, displayLine = repcap.DisplayLine.Default)

This command defines the (horizontal) position of a display line.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param displayLine

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Dline’)

return

line: No help available

set(line: float, window=Window.Default, displayLine=DisplayLine.Default) → None[source]

# SCPI: CALCulate<n>:DLINe<dl>
driver.applications.k50Spurious.calculate.dline.set(line = 1.0, window = repcap.Window.Default, displayLine = repcap.DisplayLine.Default)

This command defines the (horizontal) position of a display line.

param line

No help available

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param displayLine

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Dline’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k50Spurious.calculate.dline.clone()

Subgroups

State