Source
SCPI Commands
TRIGger:SEQuence:SOURce
- class SourceCls[source]
Source commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get() TriggerSourceL [source]
# SCPI: TRIGger[:SEQuence]:SOURce value: enums.TriggerSourceL = driver.applications.k50Spurious.trigger.sequence.source.get()
This command selects the trigger source. Note on external triggers: If a measurement is configured to wait for an external trigger signal in a remote control program, remote control is blocked until the trigger is received and the program can continue. Make sure that this situation is avoided in your remote control programs.
- return
source: IMMediate Free Run EXT | EXT2 Trigger signal from one of the ‘Trigger Input/Output’ connectors. Note: Connector must be configured for ‘Input’.
- set(source: TriggerSourceL) None [source]
# SCPI: TRIGger[:SEQuence]:SOURce driver.applications.k50Spurious.trigger.sequence.source.set(source = enums.TriggerSourceL.EXT2)
This command selects the trigger source. Note on external triggers: If a measurement is configured to wait for an external trigger signal in a remote control program, remote control is blocked until the trigger is received and the program can continue. Make sure that this situation is avoided in your remote control programs.
- param source
IMMediate Free Run EXT | EXT2 Trigger signal from one of the ‘Trigger Input/Output’ connectors. Note: Connector must be configured for ‘Input’.