Slope

SCPI Commands

TRIGger:SEQuence:SLOPe

class SlopeCls

Slope commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → SlopeType

# SCPI: TRIGger[:SEQuence]:SLOPe
value: enums.SlopeType = driver.applications.k60Transient.trigger.sequence.slope.get()

This command selects the trigger slope.

return

type_py: POSitive | NEGative POSitive Triggers when the signal rises to the trigger level (rising edge) . NEGative Triggers when the signal drops to the trigger level (falling edge) .

set(type_py: SlopeType) → None

# SCPI: TRIGger[:SEQuence]:SLOPe
driver.applications.k60Transient.trigger.sequence.slope.set(type_py = enums.SlopeType.NEGative)

This command selects the trigger slope.

param type_py

POSitive | NEGative POSitive Triggers when the signal rises to the trigger level (rising edge) . NEGative Triggers when the signal drops to the trigger level (falling edge) .