State
SCPI Commands
INPut<InputIx>:FILTer:HPASs:STATe
- class StateCls[source]
State commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get(inputIx=InputIx.Default) bool [source]
# SCPI: INPut<ip>:FILTer:HPASs[:STATe] value: bool = driver.applications.k70Vsa.inputPy.filterPy.hpass.state.get(inputIx = repcap.InputIx.Default)
Activates an additional internal high-pass filter for RF input signals from 1 GHz to 3 GHz. This filter is used to remove the harmonics of the R&S FSWP to measure the harmonics for a DUT, for example. This function requires an additional high-pass filter hardware option. (Note: for RF input signals outside the specified range, the high-pass filter has no effect. For signals with a frequency of approximately 4 GHz upwards, the harmonics are suppressed sufficiently by the YIG-preselector, if available.)
- param inputIx
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘InputPy’)
- return
state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on
- set(state: bool, inputIx=InputIx.Default) None [source]
# SCPI: INPut<ip>:FILTer:HPASs[:STATe] driver.applications.k70Vsa.inputPy.filterPy.hpass.state.set(state = False, inputIx = repcap.InputIx.Default)
Activates an additional internal high-pass filter for RF input signals from 1 GHz to 3 GHz. This filter is used to remove the harmonics of the R&S FSWP to measure the harmonics for a DUT, for example. This function requires an additional high-pass filter hardware option. (Note: for RF input signals outside the specified range, the high-pass filter has no effect. For signals with a frequency of approximately 4 GHz upwards, the harmonics are suppressed sufficiently by the YIG-preselector, if available.)
- param state
ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on
- param inputIx
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘InputPy’)