Power
SCPI Commands
CALCulate<Window>:UNIT:POWer
- class PowerCls[source]
Power commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get(window=Window.Default) PowerUnitB [source]
# SCPI: CALCulate<n>:UNIT:POWer value: enums.PowerUnitB = driver.calculate.unit.power.get(window = repcap.Window.Default)
This command selects the unit of the y-axis. The unit applies to all power-based measurement windows with absolute values.
- param window
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)
- return
unit: DBM | V | A | W | DBPW | WATT | DBUV | DBMV | VOLT | DBUA | AMPere
- set(unit: PowerUnitB, window=Window.Default) None [source]
# SCPI: CALCulate<n>:UNIT:POWer driver.calculate.unit.power.set(unit = enums.PowerUnitB.A, window = repcap.Window.Default)
This command selects the unit of the y-axis. The unit applies to all power-based measurement windows with absolute values.
- param unit
DBM | V | A | W | DBPW | WATT | DBUV | DBMV | VOLT | DBUA | AMPere
- param window
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)