Immediate

SCPI Commands

INITiate:SEQuencer:IMMediate

class ImmediateCls

Immediate commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None

# SCPI: INITiate:SEQuencer:IMMediate
driver.initiate.sequencer.immediate.set()

This command starts a new sequence of measurements by the Sequencer. Its effect is similar to the method RsFswp. Applications.K30_NoiseFigure.Initiate.Immediate.set command used for a single measurement. Before this command can be executed, the Sequencer must be activated (see method RsFswp.System.Sequencer.set) .

set_with_opc(opc_timeout_ms: int = -1) → None

# SCPI: INITiate:SEQuencer:IMMediate
driver.initiate.sequencer.immediate.set_with_opc()

This command starts a new sequence of measurements by the Sequencer. Its effect is similar to the method RsFswp. Applications.K30_NoiseFigure.Initiate.Immediate.set command used for a single measurement. Before this command can be executed, the Sequencer must be activated (see method RsFswp.System.Sequencer.set) .

Same as set, but waits for the operation to complete before continuing further. Use the RsFswp.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.