Data
SCPI Commands
SENSe:CORRection:CVL:DATA
- class DataCls[source]
Data commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- class DataStruct[source]
Response structure. Fields:
Freq: List[float]: The frequencies have to be sent in ascending order. Unit: HZ
Level: List[float]: Unit: DB
- get() DataStruct [source]
# SCPI: [SENSe]:CORRection:CVL:DATA value: DataStruct = driver.sense.correction.cvl.data.get()
This command defines the reference values of the selected conversion loss tables. The values are entered as a set of frequency/level pairs. A maximum of 50 frequency/level pairs may be entered. Before this command can be performed, the conversion loss table must be selected (see [SENSe:]CORRection:CVL:SELect) . This command is only available with option B21 (External Mixer) installed.
- return
structure: for return value, see the help for DataStruct structure arguments.
- set(freq: List[float], level: List[float]) None [source]
# SCPI: [SENSe]:CORRection:CVL:DATA driver.sense.correction.cvl.data.set(freq = [1.1, 2.2, 3.3], level = [1.1, 2.2, 3.3])
This command defines the reference values of the selected conversion loss tables. The values are entered as a set of frequency/level pairs. A maximum of 50 frequency/level pairs may be entered. Before this command can be performed, the conversion loss table must be selected (see [SENSe:]CORRection:CVL:SELect) . This command is only available with option B21 (External Mixer) installed.
- param freq
The frequencies have to be sent in ascending order. Unit: HZ
- param level
Unit: DB