Manual

SCPI Commands

SENSe:FILTer<FilterPy>:HPASs:FREQuency:MANual

class ManualCls

Manual commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(filterPy=FilterPy.Default) → float

# SCPI: [SENSe]:FILTer<n>:HPASs:FREQuency:MANual
value: float = driver.sense.filterPy.hpass.frequency.manual.get(filterPy = repcap.FilterPy.Default)

This command selects the cutoff frequency of the high pass filter for the specified evaluation. For details on the high pass filters, refer to ‘High Pass’.

param filterPy

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘FilterPy’)

return

frequency: numeric value Range: 0 to 3 MHz, Unit: HZ

set(frequency: float, filterPy=FilterPy.Default) → None

# SCPI: [SENSe]:FILTer<n>:HPASs:FREQuency:MANual
driver.sense.filterPy.hpass.frequency.manual.set(frequency = 1.0, filterPy = repcap.FilterPy.Default)

This command selects the cutoff frequency of the high pass filter for the specified evaluation. For details on the high pass filters, refer to ‘High Pass’.

param frequency

numeric value Range: 0 to 3 MHz, Unit: HZ

param filterPy

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘FilterPy’)