Channel<Channel>

RepCap Settings

# Range: Ch1 .. Ch64
rc = driver.sense.power.achannel.sblock.center.channel.repcap_channel_get()
driver.sense.power.achannel.sblock.center.channel.repcap_channel_set(repcap.Channel.Ch1)

SCPI Commands

SENSe:POWer:ACHannel:SBLock<SubBlock>:CENTer:CHANnel<Channel>

class ChannelCls

Channel commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: Channel, default value after init: Channel.Ch1

get(subBlock=SubBlock.Default, channel=Channel.Default) → float

# SCPI: [SENSe]:POWer:ACHannel:SBLock<sb>:CENTer[:CHANnel<ch>]
value: float = driver.sense.power.achannel.sblock.center.channel.get(subBlock = repcap.SubBlock.Default, channel = repcap.Channel.Default)

No command help available

param subBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sblock’)

param channel

optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

return

frequency: No help available

set(frequency: float, subBlock=SubBlock.Default, channel=Channel.Default) → None

# SCPI: [SENSe]:POWer:ACHannel:SBLock<sb>:CENTer[:CHANnel<ch>]
driver.sense.power.achannel.sblock.center.channel.set(frequency = 1.0, subBlock = repcap.SubBlock.Default, channel = repcap.Channel.Default)

No command help available

param frequency

No help available

param subBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sblock’)

param channel

optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.sense.power.achannel.sblock.center.channel.clone()