from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from .....Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class ContinuousCls:
"""Continuous commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("continuous", core, parent)
[docs] def set(self, state: bool) -> None:
"""SCPI: INITiate:CONTinuous \n
Snippet: driver.applications.k30NoiseFigure.initiate.continuous.set(state = False) \n
This command controls the measurement mode for an individual channel. Note that in single measurement mode, you can
synchronize to the end of the measurement with *OPC, *OPC? or *WAI. In continuous measurement mode, synchronization to
the end of the measurement is not possible. Thus, it is not recommended that you use continuous measurement mode in
remote control, as results like trace data or markers are only valid after a single measurement end synchronization.
If the measurement mode is changed for a channel while the Sequencer is active the mode is only considered the next time
the measurement in that channel is activated by the Sequencer. \n
:param state: ON | OFF | 0 | 1 ON | 1 Continuous measurement OFF | 0 Single measurement
"""
param = Conversions.bool_to_str(state)
self._core.io.write(f'INITiate:CONTinuous {param}')
[docs] def get(self) -> bool:
"""SCPI: INITiate:CONTinuous \n
Snippet: value: bool = driver.applications.k30NoiseFigure.initiate.continuous.get() \n
This command controls the measurement mode for an individual channel. Note that in single measurement mode, you can
synchronize to the end of the measurement with *OPC, *OPC? or *WAI. In continuous measurement mode, synchronization to
the end of the measurement is not possible. Thus, it is not recommended that you use continuous measurement mode in
remote control, as results like trace data or markers are only valid after a single measurement end synchronization.
If the measurement mode is changed for a channel while the Sequencer is active the mode is only considered the next time
the measurement in that channel is activated by the Sequencer. \n
:return: state: ON | OFF | 0 | 1 ON | 1 Continuous measurement OFF | 0 Single measurement"""
response = self._core.io.query_str(f'INITiate:CONTinuous?')
return Conversions.str_to_bool(response)