from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class ConMeasCls:
"""ConMeas commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("conMeas", core, parent)
[docs] def set(self) -> None:
"""SCPI: INITiate:CONMeas \n
Snippet: driver.applications.k60Transient.initiate.conMeas.set() \n
This command restarts a (single) measurement that has been stopped (using method RsFswp.#Abort CMDLINKRESOLVED]) or
finished in single measurement mode. The measurement is restarted at the beginning, not where the previous measurement
was stopped. As opposed to [CMDLINKRESOLVED Applications.K30_NoiseFigure.Initiate.Immediate.set, this command does not
reset traces in maxhold, minhold or average mode. Therefore it can be used to continue measurements using maxhold or
averaging functions. \n
"""
self._core.io.write(f'INITiate:CONMeas')
[docs] def set_with_opc(self, opc_timeout_ms: int = -1) -> None:
"""SCPI: INITiate:CONMeas \n
Snippet: driver.applications.k60Transient.initiate.conMeas.set_with_opc() \n
This command restarts a (single) measurement that has been stopped (using method RsFswp.#Abort CMDLINKRESOLVED]) or
finished in single measurement mode. The measurement is restarted at the beginning, not where the previous measurement
was stopped. As opposed to [CMDLINKRESOLVED Applications.K30_NoiseFigure.Initiate.Immediate.set, this command does not
reset traces in maxhold, minhold or average mode. Therefore it can be used to continue measurements using maxhold or
averaging functions. \n
Same as set, but waits for the operation to complete before continuing further. Use the RsFswp.utilities.opc_timeout_set() to set the timeout value. \n
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call."""
self._core.io.write_with_opc(f'INITiate:CONMeas', opc_timeout_ms)