State

SCPI Commands

TRACe:IQ:STATe
class StateCls[source]

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → bool[source]
# SCPI: TRACe:IQ[:STATe]
value: bool = driver.applications.iqAnalyzer.trace.iq.state.get()

This command activates the simple I/Q data acquisition mode (see ‘Activating I/Q analyzer measurements’) . Executing this command also has the following effects:

INTRO_CMD_HELP: Prerequisites for this command

  • The sweep, amplitude, input and trigger settings from the measurement are retained.

  • All measurements are turned off.

  • All traces are set to ‘Blank’ mode.

  • The I/Q data analysis mode is turned off (TRAC:IQ:EVAL OFF) .

Note: To turn trace display back on or to enable the evaluation functions of the I/Q Analyzer, execute the TRAC:IQ:EVAL ON command (see method RsFswp.Applications.IqAnalyzer.Trace.Iq.Eval.set) .

return

state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

set(state: bool) → None[source]
# SCPI: TRACe:IQ[:STATe]
driver.applications.iqAnalyzer.trace.iq.state.set(state = False)

This command activates the simple I/Q data acquisition mode (see ‘Activating I/Q analyzer measurements’) . Executing this command also has the following effects:

INTRO_CMD_HELP: Prerequisites for this command

  • The sweep, amplitude, input and trigger settings from the measurement are retained.

  • All measurements are turned off.

  • All traces are set to ‘Blank’ mode.

  • The I/Q data analysis mode is turned off (TRAC:IQ:EVAL OFF) .

Note: To turn trace display back on or to enable the evaluation functions of the I/Q Analyzer, execute the TRAC:IQ:EVAL ON command (see method RsFswp.Applications.IqAnalyzer.Trace.Iq.Eval.set) .

param state

ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on